Grist Mill GPX Download Updated!


Updated Version (April 2012) Ready In The Downloads Window!

There is a new updated version of the Grist Mill GPX file available in the Downloads area on the right side menu!  I have added all of the Ohio and Indiana mills plus made repairs to older entries that proved to be incorrect!  Please download them and install on your GPS!

As ALWAYS please share the lat/long, name, location, address and description of any mills that you find that are NOT on this download!!

Glade Creek Grist Mill, WV

Thanks for your continued help.

Advertisements

The Hammond & Gilbert Mills In Rhode Island


The Gilbert Stuart Museum & Mills

In Color, Infrared and B&W

The Hammond & Gilbert Mills

The Hammond & Gilbert Mills

The Hammond Mill, Selective Focus

I would like to draw your attention to a specific Grist Mill in Rhode Island!  This is the Hammond and Gilbert Mills at the Gilbert Stuart Museum.  What is so unusual about them is the fact that they are 50 feet apart on the same creek feed!  The Gilbert Mill was a Snuff Mill with living quarters for the family above the mill.  The Hammond Mill is and was a standard Grist Mill.  Both Mills are in AMAZING condition and the location just screams “Photograph Me“!    Location is a little in the back country but well worth the drive.  If you would like directions then download the Mills GPX file in the download window to the right!

The Gilbert Mill

The Mills are full of promise!  Look for detail shots as well as wide angle shots.  If you arrive mid day then you will likely be only able to shoot in Infrared (hey, not exactly a bad thing, you think?)  I think that early morning would be the best.  There is a nice standing pond behind the mills for reflection shots and the water path below the mills is actually a fish ladder to aid in migration! As I said, VERY PRETTY!

I shot these images using a Panasonic GH2 Micro 4/3 camera body (Color) and the Pansaonic 14-140mm lens.  For the Infrared shots I used my Olympus E-PL1 Full Spectrum Infrared camera body with the Olympus 14-150mm lens and an external (on the lens) B+W 091 630nm IR filter.  Since the previous post has a lengthy description and recipe for post processing these IR images I am going to leave the same out of this post!

Again, I am going to place all of the images of these amazing mills in a photo album below and all you have to do is to click on any image to bring up the slide show!

_____________________

_____________________

I hope that you enjoy this collection of a VERY unusual Mill!  

Please let me know what you think!

Grist Mills Of Rhode Island


Post Processing the Infrared Grist Mills of Rhode Island

Hammond Mill, Selective Focus

I have just now getting around to post processing the Rhode Island section of The Great 2 Week Grist Mill Trip!  I cannot believe that I am so behind… Oh well, better late than never!  Since completion of the trip I have had 2 other Grist Mill Trips with a ton of photos in the que! All of these images were taken on my Olympus E-PL1 Full Spectrum converted IR system using the Oly 14-150mm lens with a B+W 091 630nm filter.

As you can see I processed for both Faux Color and B&W IR images because you just never know how they will look unless you try!

Does everyone understand exactly what a Faux Color Infrared image is?  It is likened to the old Kodak HIE IR films of the 80’s (I actually designed the silver salt growing system for that film while I worked at Kodak!).  In modern converted IR digital camera systems the images are true IR images, but since the sensor is RGB we have a lot of color data there!  To get to what the film was capable of producing we simply swap the data on the Red and Blue channel of the image in Photoshop, fine tune the colors in NIK Viveza and work from there!  Just because it is described as a Faux or False Color IR image doesn’t mean that it is so!

The B+W 091 is a little more on the red  end of the spectrum so the images tend to (when Faux Color…) lean more towards the pinks and reds.

Basic Post processing is as follows:

  1. After conversion of my RAW files in Capture One Pro v6 I then do my critical deletion edit using Bridge.  This is perhaps the most difficult step. You have to look beyond low contrast off color images and see what they can be. Look for coloration (this will get better with time), emotional impact (yes you CAN do this! I have several BLOG postings here that talk specifically about this one…) and sharpness and exposure.  Think about each and every image in terms of Faux Color and B&W! When finished, I then open the images one at a time in Adobe Photoshop CS5 with ALL of the NIK filters installed.
  2. I did my normal cropping to my master storage size of 12.5×8.5 making sure that the image was at 300dpi and in the Adobe RGB 1998 color space
  3. I ran NIK Software’s Define 2.0 for noise reduction. For this I simply accept the default settings!
  4. I then ran NIK Viveza 2.0 and specifically added 20% structure and 10% extra contrast without any control points so that the changes affected the entire image!  This was to create a brighter deeper image before I ran the channel swap Photoshop Action!  WOW!  WHAT A DIFFERENCE THIS MADE!
  5. I then ran the channel swap action and proceeded as normal with the rest of my Post Processing Recipe! This is the Khomography Photoshop Action that you can download here towards the bottom of the right hand menu! The action swaps data between the Red and Blue image channel and allows you to adjust the Hue/Saturation in the Red, Yellow, Green, Cyan, Blue & Magenta color channels separately!
  6. In the action select the Red, Yellow, Cyan and Blue channels and adjust each of them using saturation and hue to get the image elements to start to fall into place. Pay careful attention to the Cyan channel adjustment as most of the time the sky takes on a green/aqua tint which looks terrible!  Simply adjust the Hue of the Cyan channel to fix this!
  7. Now, Calling up Nik’s Viveza again I will select specific elements of the image with control points.  I will add contrast and structure then adjust the primary colors R,G and B to adjust the specific color of the compositional element to achieve the overall color I want for it.  You can also use the Warmth Slider to add or remove warmth.  This entire process takes only a few moments to do if you understand your basic color wheel and how to mix to change!  This process will give you your final ball park image!
  8. THEN I called up another of NIK Software’s world class filters and ran the TONAL CONTRAST filter in the COLOR EFX PRO plugin.  The result was this incredible image full of contrasts tonalities as well as contrasting colors!

Rather than simply place the images here in the post separately I am going to try Word Press’s new Photo Gallery.  Simply click on any of the images that you see to bring up a nice slide show!

Photographic Notes Page


I have added a new Photographic Notes page!

Plan and turn this SUBJECT into...

This is a new section designed to document and teach basic photographic planning, destinations, composition while also providing subject location information!  The data here is neither Infrared or Color specific… Rather it is Photography specific!  It is how I plan and document my photographic journeys. I hope that you enjoy and are able to use this information. To access it simply click on the NOTES menu button on the top of this page then select the drop down menu item that interests you!

I normally keep my notes on an Apple iPad (1) using an application called Penultimate which is the best and most versatile note and image writing tool that I have found for the Apple family of portable devices.

INTO THIS!

Added Grist Mill GPX and Covered Bridge GPX Updated Files!


Go Get Them!

Glade Creek Mill, WV

There are two new downloads for your GPS system in the download box!  I added the Covered Bridges in Georgia and several NEW and corrected Grist Mill locations!

These are in the GPX file format and can be downloaded from here from the download menu on the lower right menu.

Once you have them on your computer you will need to have the GPS software that camera with your personal GPS to download them into your GPS.

Once done they will be available for you while you travel around the country!

As Always, I would appreciate ANY help that any of your could offer in expanding this database!  So far there are 185 Grist Mill locations and I would like to double that by the end of the year.

Send the following information to have it included in the Database:

  • Mill or Bridge name
  • Address
  • State
  • Lat/Long (IMPORTANT)
  • Description
  • Info on ownership and contact info if on private property.
  • You name and email
  • Best time of day and season for photographing them
  • Image if possible

2 New GPX Files Added To Download Area


Downloadable GPS Data Files Added!

i have moved the first versions of the Grist Mill and Covered Bridges GPX files to the download area (right hand menu system).  These files (once downloaded to your computer) can be opened in your GPS management software installed on your computer and sent to your GPS unit that you use in your car!  All of the GPS products out there have management software to do this in both the Mac and PC world!

Please feel free to send me your input to this list and I will update them from time to time!

 

 

The Great Grist Mill GPS Project


Please Help!

Hagood Mill, 630nm, SC

I am in the process of building a GPX file that can be downloaded to your own GPS  (once downloaded here on the right) and have EXACT driving directions to these fabulous photographic icons!  I think that I am up to about 60 mills so far but it is a DIFFICULT job!  The amount of research on the internet and in books is mind boggling!  Many of the mills found offer no address or lat/long.  Several provide maps only that take time to locate within my Garmin software for creating the lists.

Old French Mill, 590nm, TN

I have joined SPOON and located several other online data bases that contain mill listings like Ohio Barns (another name for covered bridges!)  Each and every day I locate a new mill and add it to my own database to create the current GPX files.  This takes real time….

Rock Run Mill, 630nm, MD

There are many mills that I choose not to add.  I am mainly looking for mills worthy of photography and not factory mills that simply show a large industrial building.  This alone removes about 50% of the available mills from the running!  I just got back (well 2 months ago) from a 2 week long mill exploration trip between South Carolina and Boston including states as far west as Tennessee  and Kentucky!

Within the week I will add the Mills.gpx file to the download are on the right side menu for you to start using!

Mingus Mill, TN

If any of you out there know of any good grist mills worth visiting then please send the information along to me and I will add it to my own listing.  I have most of the mid and eastern states added except for Ohio and NY.  I am currently struggling through PA but I have to tell you that there are more mills there than in any other state!

Please feel free to include listings for Covered Bridges as I will create a GPX file for those as well!

Here is the data that I need, you can even send along a GPX file from your own gps via email as well:

  • Mill Name
  • Mill Address
  • Closest City
  • Description of mill
  • Photographic composition suggestions and site layout
  • Lat/Long
  • Mill Web Page
  • Small Photo of Mill

The Cuttalossa Mill, PA

Please consider helping me in this work as it will benifit us all!

A New Look & Feel


Updated Theme For Easier Reading!

The Wheel at the St. Charles Mill, St. Louis, 590nm

Welcome to the new look and feel of Infrared Atelier’s fine art Infrared photography educational BLOG!  I have been looking at new and different blog themes for months!  The reasoning for this was to make the posts easier to see and read.

I have thought that the text and formatting in the old theme was very hard to read on the computer screen and was very unhappy with it. Finally a new theme arrived at WordPress and I am very excited about the ease of its readability!

I have also added several new page menus across the top of the page. They are not currently active yet but will be shortly.  I am most excited about the addition of my new USERS GALLERY!  Here I will allow you my readers to submit your favorite infrared images to be included.  There is only ONE requirement… The images selected must impact the views on an emotional level! Not all images submitted will be selected but many will. You must provide a short 2 paragraph bio and your images must be sized at 1024 x 768 at 72dpi in JPG format with sRGB color profile attached.  You may email your images and bio to me at:   mark@thelensworkgallery.com

Please let me know what you think!

Fine Art B&W IR Post Processing


A Well Done B&W Conversion Is Something Truly Wonderful To Behold!

630nm B&W IR, Rock Run Mill

I LOVE B&W photography!  Add Infrared into the equation and you have a winning combination what will draw your viewer in while holding them captive…. As long as you get the right combination in your B&W conversions!  Seriously, this is not all that hard but you would be surprised how often it is done badly!  A well done B&W conversion is something truly wonderful to behold!  But… There are several steps in the process that one should follow in order to create art on this level.

They Are:

  • A worthy subject!
  • Good cross image contrasts.
  • Good Exposure
  • Photoshop CS5
  • Nik Software’s Define 2.0, Viveza 2.0 & Silver EFX Pro 2
  • Good Faux Color Post Processing
  • Separate adjustment of image contrasts in the fore, mid and background
  • Choosing the right Silver EFX model or creating one of your own.

The purpose of this post is to take you through the process to create these types of B&W Infrared images as I do it.  I am not saying that my way is the best, only that it is the best that I have come up with that works for me!  There are dozens of B&W converters out there and hundreds of ways to accomplish the same within photoshop.

Let us take the top image as a case in point.  This is the Rock Run Mill in the Cumberland/Maryland Gap that I took on my recent “Great Grist Mill Trip” a couple of months ago.  I came back with hundreds of grist mill images that grab me by the throat and smack me around with their emotional impact (what more can you ask of an image?) , but this is one of my favorites!

I stood there in front of the mill for several moments just taking it in. I really looked closely at it all of the while deciding how I wanted to capture it.  Yes I photographed it in color, but my main intent was to focus on Infrared.  I examined it from all angles, looking at the fore, mid and backgrounds, the sky and trees.  I wanted, no desired to create an emotionally charged image that would grab my viewers and hold onto them.  I wanted them to feel what I did standing in front of it!

So, I settled on this view and angle.  The sky was moody, the mill with the brickwork  and large water wheel in front the the tree line made for an amazing composition.  I even used a tripod for this image wanting the best capture possible.  I decided upon the B+W 091 630nm filter (no surprises there) because of the combination of stunning Faux Color and B&W it would provide.  I set my exposure with a spot meter on the top quadrant of the black water wheel and set that at Zone 3 in order to establish detail in the holding buckets.  What!?!  You don’t know what Zone 3 is?  OK, I will cover that in a future post but for now, know that it is a term in controlling perfect exposure.  Everything else fell into place once I decided upon the exposure.

This is the image that I captured in Faux Color after post processing (see post on 590nm for detailed instructions on how I do this):

630nm Faux Color IR, Rock Run Mill

As you can see, the Faux Color image in itself is a stunning emotionally charged capture.  The post processing was a little more complicated due to the driveway and parking lot which was made up of tar and patches of stone.  This caused about 30 more seconds of processing with Nik’s Viveza… Oh well!  I really do like this image all by itself but I KNEW that I could do so much more with it in B&W!  So after saving this image as you see it, I continued on with my B&W post processing.

The order to things in the overall process is:

  1. Raw conversion into a 16 bit Tiff image.
  2. Crop to master image library size in Photoshop.
  3. Run Nik Define to control noise in the sky
  4. Run Nik Viveza to increase saturation, contrast & structure over the ENTIRE image.
  5. Run the Komography Faux Color Photoshop action (you can download it here on the right menu).  Within the Hue and Saturation window at the end of the action select the RED channel and bring up the saturation to start the color adjustment of the trees.  Select the Yellow and do the same.  Select the Cyan and adjust the HUE to bring the sky back to a normal blue!
  6. Run Nik Viveeza again to adjust fore, mid & background contrast.  Adjust individual element colors and structure.  Remove all saturation in the foreground parking lot and selected mill items.  Remove all saturation in the clouds.  Adjust the blue sky hue.  Adjust the color and structure of the building and wheel.
  7. Flatten and save.
  8. Run Nik Silver EFX Pro 2.0.  Adjust the individual elements after you select the B&W model.  For this image I chose the Wet Rocks option then using control points adjusted various image elements within the filter to get the overall look and feel to the image.  I spent about 5 min within this filter. I decided upon the Wet Rocks model because for this image I wanted a crisp or almost HDR effects!  Plus the model also gives rich blacks and highlights.  I could have simply adjusted the image the same way by taking control of the sliders within Silver EFX but have learned that several of the models give the results I like very quickly and easily!
  9. Flatten and save.

Here is the Nik Silver EFX Pro 2 window to show you some of the options that are at your control.  If you want to seriously create stunning B&W work then this is the way to go!

Nik Software's Silver EFX Pro 2.0

All done.  The overall time that I spent on this image was about 7 min!  I could have spent a little more to do little things like cloning out the cars to the right but I decided to leave them there as a subtle contrast of old and new!

What do you think?  Please let me know!

The Grist Mill Trip – Day 1


So Much Fun That It Hurts!

Mabry Mill, Blue Ridge Parkway, VA. 630nm Faux IR

Well, I should warn you here…. This is going to be a series of LONG posts (about 6) that will be comprised of both Infrared and Color photography!  I feel that to show only one or the other will just not do credit to the locations that I visited!

I am tired, we got back last Wednesday night after 2800 miles of driving from Pawleys Island to Boston.  Boston was the location of a wedding that I had to attend with my wife and the motivation for 10 days of travel to visit Grist Mills, Covered Bridges & Lighthouses!

Yes, I have a VERY UNDERSTANDING & SUPPORTIVE WIFE!

It was a very relaxing trip and we visited about a dozen of each of the subjects.  I had a great and successful time. I tried to make sure that we visited each location in the best light but as you know sometimes that is just impossible.  This is where Infrared can save the day (or vacation)!  Some locations screamed color but I shot in both formats regardless.  I hope that you enjoy the images as much as I did making them!

Our first planned stop was on the Blue Ridge Parkway in Virginia at the Mabry Mill.  This is likely the most photographed mill in the country and you can see why from the images. It is a stunningly beautiful location with a perfect mill.  The elements of a perfect IR image are all there:  Water Reflections,  Green Leaves & Sky.  Usually there are so many people visiting the mill that it is hard to get a shot without them in it.  Today was the exception.  We got there about 2 pm and it was overcast with very subdued light.  I couldn’t have asked for better conditions for both color and infrared.

Mabry Mill, B&W 630nm Long View

The long view when approaching the mill gives a stunning framed image using the fence, hill and trees.  The entire property is in pristine condition and just screams “Take My Picture”!  Below is a Faux Color version of the same image.

Processing with my standard Faux Color recipe:

For CS5:

  1. Taking the picture I adjusted the exposure compensation to -.7ev to keep the red channel under control and not blow out the sky.  I also set the White balance using a BRNO neutral WB lens cap.
  2. After moving the image to the computer via Downloader PRO (see recent post) and RAW processing with  Capture One V5 where I added a little contrast and clarity, I opened the image in CS5.
  3. I cropped for my master library size (8.5×12.5)
  4. Run NIK Software’s Viveza 2.0 and apply about 15% STRUCTURE to the overall image only by not using control points.
  5. Run the Khromagery Faux Color Action (down load on the right).  In the Master Color Channel I simply increased the Saturation as necessary which brought out the blue sky & water and the yellow plants.  I then choose the Cyan, Red & Yellow channel adjustments and made sure to adjust the HUE to where I liked it.
  6. The ABOVE Cyan adjustment is important, I hate sky’s and water looking blue-green, so I always adjust the Cyan HUE to go to normal blue!
  7. I then flattened the Adjustment Layers.
  8. Next I ran NIK Software’s Viveza (a Photoshop plug in) and simply made point selections of the color I wished to modify, ran up the structure to bring out detail and adjusted the brightness.  I did this to all of the color areas I needed to like the water surface, the yellow plants and the blue sky. I also selected the warm colored wood of the Trunk and the rocks in the foreground and removed color saturation forcing them to be B&W!
  9. Again flatten the image.
  10. Save as a PSD file

For Elements:

You MUST install the Elements Plus Plugin (see post on this BLOG for link)

Link Here to Detailed Post On Elements Processing

  1. Convert your RAW image to Tiff.
  2. Open in Elements
  3. Crop
  4. Run NIK Software’s Define 2.0 noise reduction filter.
  5. Run NIK Software’s Viveza 2.0 and apply STRUCTURE only.
  6. Open the Channel Mixer, changing red and blue
  7. Run the Hue/Saturation adjustment and adjust DOWN the saturation HUE on the Cyan channel.
  8. Run NIK Software’s Viveza 2.0 and make your color, saturation, structure & contrast adjustments across the entire image.
  9. Flatten the Layers
  10. Save as a TIFF or PSD in your output library with a meaningful name!

The most important aspect of this is to look at the trees. Do you see how the leaves look slightly different in coloration?  This means that you should adjust each tree to a slightly different hue to get the most impact!  These small adjustments are so easy to accomplish with Nik Software’s Viveza plugin.

Mabry Mill, Long View. Faux Color 630nm

This image was also one of those rare ones that looked good in the RAW format.  By this I mean straight out of the camera, converted from RAW to TIFF and processed for contrast and structure only using NIK Viveza.  As you can see, it generated a rather pleasing image that is soft on the eyes!

Mabry Mill, Long View, RAW 630nm

As I said, the lighting was very subdued so I could shoot in color also.  Here is a version of that at the same location for you to compare.  Which do you like the best?

Mabry Mill, Long View, Color, Panasonic GH2 w/ 14-42mm Lens

But what ever you decide, make sure that you totally explore your subject.  Walk around it, take both long and short view images, landscape and portrait, DETAIL closeup shots and look for the unexpected!

Mabry Mill, Sluice

Process EVERY image you take in both color and B&W (color) and RAW, Faux and B&W (Infrared).  You will be surprised at the variety of emotions each will generate! Below is the same color image but converted to a medium contrast B&W image using NIK Silver EFX Pro V2.  I actually think that in the case of this image that the B&W image has more impact!

Mabry Mill Sluice, Color Converted To B&W

OK, moving on, I moved in closer to the mill but still giving space for a water reflection in the foreground. This image is a little more pleasing due to the greater detail that our eyes can detect.  Again, process in all possible ways to discover what we actually have!

Mabry Mill Closeup, RAW

Mabry Mill Closeup, Color

Mabry Mill Closeup, 630nm B&W

Now, had it been a bright sunny day color photography would have been out of the question due to the late arrival time at the mill.  Keep this in mind as you plan your excursions.  Regardless of this, you can always depend on great Infrared images any time of the day.  That is a pretty good motivation to embrace IR don’t you think?

This was a really good first day for the trip.  Mabry Mill is indeed worth the time necessary to travel to it.

There is another mill around the corner from it about 3 miles away, but it is in a commercial center and the wheel is gone.

Knowing that I was going to take 10 days to travel up the east coast to Boston, I RESEARCHED all of the mills and covered bridges from South Carolina north, and Missouri  east all the way up. I think that I have all of the worthwhile mills in 19 states entered into my GPS now!  There are about 300 mills that I narrowed down to about 75 based on their beauty first and foremost.  I then took the time to enter them ALL into my GPS so that I could easily find them.  This also has the added benefit that as you travel, the GPS will show you how far away you are from any of the mills in the list and continually update moving the closest to the top of the list!  What more could you ask for when you are ALWAYS in search of mills?

Even now that the trip is over I continue to research mills.  Just this weekend I added another 30 to my GPS list.  This list can be managed on your computer and downloaded directly to your GPS! 

I plan on adding this way point list to my download section here on this blog shortly so that you all can have access to these perfect subjects!  I only hope that you do the same and share new mills with me!

I hope that you enjoyed this LONG OVERDUE first post on the 2011 Great Grist Mill trip!  I will add every few days the next day of travel as I process the days images.  Keep in mind that I came back with over 2500 images which I reduced to about 1200 by the first editing step:  DELETION of the bad, marginal or duplicate images.

Tomorrow, Day 2:  Lancaster County, PA for Covered Bridges and Amish Farmland!